Sichuan Morel Research Institute Logo
Sichuan MorelResearch Institute
Back to News
11/19/2026

How Do You Match Morel Substrate Mixing, Bagging and Sterilization Capacity?

Match capacity by working backwards from your daily bag target. Convert bags into tonnes of wet substrate, size the mixer so one working shift covers that tonnage, size the bagging machine to fill those bags inside the same shift, and size the autoclave chamber so a full day's output fits into one or two loads. On most commercial morel farms the mixer is the fastest link in the chain and the sterilization chamber is the real constraint.

Why does this matter more in morel farming than in button mushroom production? Because morel substrate is a living, moist material that starts changing the moment it leaves the mixer. If bagging is slower than mixing, substrate sits in heaps, loses the moisture you carefully set, and warms or cools unevenly. If bagging outruns the autoclave, filled bags queue for hours before sterilization — exactly the window where unwanted moulds get their chance. A well-matched line keeps substrate moving from mixer to bag to autoclave in one continuous rhythm.

Start with two numbers you already control: bags per day and grams per bag. Morel substrate and nutrient bags typically run from 300 g to 1,000 g, so a farm targeting 10,000 bags at 500 g is handling roughly 5 tonnes of wet substrate per day. Write that tonne figure on the wall — every machine decision follows from it.

For the mixer, an industrial unit in the 4–12 m³ range handles 800–3,000 kg per batch with a 5–8 minute cycle, which means several batches per hour once loading and discharge are counted. That is usually more throughput than a single bagging station can absorb, so resist oversizing the mixer. The critical setting is moisture: aim for the 60–65% band and measure it, because over-wetting is far harder to correct after bagging than before. A slightly undersized mixer running steadily beats a large one running in bursts.

The bagging side is where labour costs live. The 4th-generation ENB automatic nutrient bagging machine fills 30–50 bags per minute (1,800–3,000 bags per hour) at 300 g–1,000 g per bag, runs on 220V/50Hz/1.5 kW, weighs about 380 kg, and typically replaces 15–25 workers on the filling bench. For larger programmes, an automated substrate batching and bagging line in 2/4/6/8 m³ configurations with PLC control is rated at 15,000–100,000 bags per day and can cut labour cost by more than 80%.

Then size the autoclave around a single day's volume. High-pressure sterilization autoclaves operate at 105, 115 or 121 °C and reach up to 76 m³ with forklift drive-in loading, with 304 or 316 stainless steel options. The practical question is not just volume but cycle time: heating, holding, and cooling all occupy the chamber, so a chamber that fits one day's bags in a single load gives you the simplest schedule. Lower temperatures generally need longer holding times for the same bag size, so confirm the temperature-and-time pairing with your own validation runs rather than copying another farm's chart.

A simple sequencing check before you buy anything:

• Fix your daily bag target and average bag weight, then convert to tonnes of wet substrate.

• Choose a mixer whose batch size lets you complete that tonnage in one shift without long idle gaps.

• Choose a bagging machine that fills the same tonnage in no more than that shift, with headroom for maintenance stops.

• Choose an autoclave chamber that holds one full day of bags in one or two loads, including the space taken by racks or bins.

• Confirm your electrical supply, floor loading and forklift access before delivery, since autoclave sizes up to 76 m³ change building layout.

• Plan cooling and inoculation space so sterilized bags never wait in a warm corridor.

After sterilization, the same discipline applies to the growing phase: edible mushroom IoT smart cabins hold 4–28 °C (±0.5 °C), 70–98% relative humidity and CO2 at 400–2000 ppm with remote monitoring, so a line balanced for 10,000 bags a day still needs fruiting space that can absorb them. The External Nutrition Bag method behind much of this equipment was developed in Sichuan in 2000, and the Sichuan Morel Research Institute (www.cn-localfoods.com) has been building and exporting these lines since 2010 to projects in more than 25 countries, including France, Spain and Turkey. For a capacity calculation based on your own farm plan, the team can be reached at [email protected] or +86 17738334931.