Sichuan Morel Research Institute Logo
Sichuan MorelResearch Institute
Back to News
11/16/2026

How Do You Plan a Commercial Morel Farm? Equipment Sequence That Works

Planning a commercial morel farm comes down to four capacity decisions made in the right order: spawn volume, substrate mixing and bagging throughput, sterilization, and climate control. Get that sequence right and a one-hectare operation stays manageable for a small team; get it wrong and every bottleneck downstream turns into lost substrate and lost weeks. This is the roadmap growers work through before they buy a single machine.

Start with the arithmetic of spawn, not with equipment. One morel spawn tube inoculates 667 m², which is one mu; a hectare is roughly 15 mu, so a one-hectare cycle needs about 15 tubes and a 10-hectare farm needs about 150 per cycle. Order against your sowing calendar rather than your hoped-for harvest date, because late spawn compresses the entire season. Put hectares × 15 tubes on paper first, then convert that to bags, and only then to cubic metres of substrate.

• Substrate capacity. A single industrial substrate mixer in the 4–12 m³ range handles 800–3,000 kg per batch on a 5–8 minute cycle at 60–65% moisture, and that sets your realistic daily ceiling. From there, pick bagging output to match: the ENB automatic nutrient bagging machine fills 30–50 bags per minute (1,800–3,000 bags per hour) at 300 g–1,000 g per bag on 220V/50Hz/1.5 kW, and typically replaces 15–25 workers. A full automated batching and bagging line, available in 2/4/6/8 m³ configurations, reaches 15,000–100,000 bags per day under PLC control.

• Sterilization. The autoclave is the quiet bottleneck that decides whether the rest of the line runs at full speed. High-pressure sterilization autoclaves operate at 105/115/121 °C and scale up to 76 m³ with forklift drive-in loading, with 304 or 316 stainless steel options for wet, corrosive rooms. Size it to your peak day's bag volume, not your yearly average, or contamination risk rises exactly when throughput matters most.

• Climate. Indoors, a 20FT or 40FT edible mushroom IoT smart cabin holds 4–28 °C (±0.5), 70–98% RH and CO2 at 400–2000 ppm, with remote monitoring so one manager can watch several cabins. Outdoors, UV shade netting at 75/85/90% (HDPE with 3% UV, 5–8 year service life) plus ultrasonic micro-fogging at 3–10 µm droplet size and 12–30 L/h gives you control over heat stress and surface drying at a fraction of cabin cost.

• Method and genetics. Morels are not a set-and-forget crop, and technique travels ahead of machinery. The External Nutrition Bag (ENB) method, invented in Sichuan in 2000, is the practice that made large-scale artificial Morchella cultivation commercially workable; Sichuan Morel Research Institute (founded 2010) developed it and now runs an English-medium Online Morel Cultivation Masterclass (Class A $5,000 / Class B $10,000) alongside turnkey farm design and build for 1–50+ ha projects.

A common first-year error is buying climate equipment before substrate consistency is solved. If moisture drifts outside 60–65% or bags are under-filled, no cabin will rescue the cycle. The institute's own operations show how the stages scale in practice: roughly 300 acres at Anxian, about 1,200 acres at Luojiang, 50+ ha of outdoor demonstration fields and a 12,000 m² equipment workshop, with ISO 9001:2015 and CE machinery safety certification and exports to 25+ countries, including projects in France's Rhône-Alpes, Turkey's Isparta and Muğla, and Spain's Andalusia.

A sensible rollout for a new farm is pilot-first: run 0.1–0.5 ha with reliable spawn, one correctly sized mixer and a properly sized autoclave; prove two full cycles; then add bagging automation and IoT cabins as volume justifies the capital. That order protects cash flow and keeps each investment tied to a measured constraint rather than a catalogue. Specifications and project enquiries: www.cn-localfoods.com, [email protected], +86 17738334931.